\documentstyle[twoside]{article} \pagestyle{myheadings} \markboth{\hfil A MOLTEN CARBONATE FUEL CELL\hfil EJDE--1993/06}{EJDE--1993/06\hfil C. J. van Duijn and J. D. Fehribach \hfil} \begin{document} \ifx\Box\undefined \newcommand{\Box}{\diamondsuit}\fi \title{\vspace{-1in}\parbox{\linewidth}{\footnotesize\noindent {\sc Electronic Journal of Differential Equations}\newline Vol. 1993(1993), No. 06, pp. 1-25. Published October 19, 1993.\newline ISSN 1072-6691. URL: http://ejde.math.swt.edu or http://ejde.math.unt.edu \newline ftp (login: ftp) 147.26.103.110 or 129.120.3.113} \vspace{\bigskipamount} \\ Analysis for a Molten Carbonate Fuel Cell \thanks{\copyright 1993 Southwest Texas State University and University of North Texas\newline\indent Submitted: July 28, 1993.\newline\indent {\em 1991 Mathematics Subject Classifications:} 80A30, 34A45, 34A46. \newline\indent {\em Key words and phrases:} Electrochemistry, Fuel Cells, Butler-Volmer Equation, \newline\indent Deadcore, Existence, Uniqueness and Approximate Solutions.} } \date{} \author{C. J. van Duijn and Joseph D. Fehribach} \maketitle %%%%%%% Set up for Black Board Bold R, N & M. %%%%%%% N.B. works only in math mode \def\BbbR{{\rm I}\kern-.2em{\rm R}} \def\BbbN{{\rm I}\kern-.2em{\rm N}} \def\BbbM{{\rm I}\kern-.2em{\rm M}} \begin{abstract} In this paper we analyze a planar model for a molten carbonate electrode of a fuel cell. The model consists of two coupled second-order ordinary differential equations, one for the concentration of the reactant gas and one for the potential. Restricting ourselves to the case of a positive reaction order in the Butler-Volmer equation, we consider existence, uniqueness, various monotonicity properties, and an explicit approximate solution for the model. We also present an iteration scheme to obtain solutions, and we conclude with a few numerical examples. \end{abstract} \section{Introduction.} Fuel Cells convert chemical energy in gases such as $H_2$, $CH_4$ and $O_2$ into electrical energy through electrochemical reactions. These cells tend to be highly efficient and are thus attractive ecological alternatives for generating electrical power. The electrodes in a typical fuel cell (the anode and the cathode) have a porous structure to obtain a large reactive area per unit of geometric area and hence a high current density. In this paper we consider a simple, dual-porosity, agglomerate-type model for the porous anode and cathode of a molten carbonate fuel cell. The model, first introduced by Giner \& Hunter (1969) and later extended by Yuh \& Selman (1984), is based on a phenomenological treatment of mass transport, electrode kinetics and ionic conduction, combined with structural assumptions. The aim of the model is to predict and optimize electrode performance in a small differential-conversion cell. The electrode structure is represented schematically in Figure 2. It is assumed to consist of an array of porous slabs with a microporous structure, separated by void regions (macro pores). In each slab, catalyst particles form agglomerates (metal matrices) which, under working conditions, are saturated with electrolyte. Throughout this paper, each slab is assumed to be a homogeneously distributed continuum of catalyst particles and electrolyte. When current is drawn from the electrodes, reactant gas diffuses horizontally across the void regions, arrives at the vertical surface of a slab, and dissolves in the electrolyte contained in the agglomerate. After diffusing a certain distance, the gas reacts electrochemically at available sites on the catalyst particles. These electrochemical reactions create an ionic current which flows through the electrolyte in the vertical $z$-direction of the slab, and an electron current which flows through the electrode material in the opposite direction. Yuh \& Selman consider a cylindrical geometry with micropore cylinders instead of slabs. This leads to radial diffusion through the pores. The corresponding analysis is similar but much less explicit in that the ordinary differential equations that arise cannot be directly integrated. We shall consider this case in a future study. The specific system of equations to be considered in this work are as follows: $$ (P)\left \{ \begin{array}{llrr} (a) & u_{xx} = \alpha u^pf(v(z)) & 00 & & \\ (f) & v_z(0) =0. & & \end{array} \right. \eqno(1.1) $$ For compact notation, the variables $x$ and $z$ are used as subscripts to denote differentiation. The derivation of this system from physical assumptions is given in Section 2. As discussed in that section, $u$ is a dimensionless concentration, $v$, a dimensionless potential, and $V$, a reference potential. The exponent $p$ is the {\sl reaction order}. In general it can be positive, negative or zero. In this paper, however, we restrict ourselves to the case where $p>0$ since this case is of most practical importance for molten carbonate fuel cells. The function $f(\cdot)$ in (1.1a) is defined by $$ f(v) := e^{\alpha _{a}v} - e^{-\alpha _{c}v} \eqno(1.2) $$ where $\alpha _a$ and $\alpha _c$ are dimensionless constants (discussed below). Note that $f$ is a smooth, strictly increasing function satisfying $f(0)=0$. Finally $\alpha$ and $\beta$ are dimensionless, lumped parameters (both positive). In (1.1a-c), the variable $v(z)$ appears only as a parameter. Therefore $u(\cdot ;v(z))$ for any $z\in[0,1]$ will have the smoothness of solutions of the auxiliary boundary value problem $$ (P_1) \left\{ \begin{array}{llr} (a) & w''=\lambda w^p\ \ \ (w\geq 0) & 0(<) 0$ corresponds to points $z\in [0,1]$ where $v(z) >(<) 0$. If Problem $(P_1)$ has a solution $w$, then $$ \lambda >(<) 0\Longleftrightarrow w'(1) >(<) 0.\eqno(1.4) $$ Let $(u,v)$ be a solution of Problem $(P)$. Then using observation (1.4), one derives that $$ v>(<) 0 \Longleftrightarrow v_{zz} >(<) 0.\eqno(1.5) $$ From\ this second observation and the boundary condition (1.1e), if follows that there {\sl cannot} be a point $z_0\in [0,1]$ where $v(z_0) <0$ and $v_z(z_0)=0$, which implies that $$ v(z) \geq 0\ \ \mbox{ and } \ \ v_z(z)\geq 0\ \ \ \ \ \forall z\in [0,1].\eqno(1.6) $$ Later (in Section 5) a stronger result is proven, viz. $$ v(z) >0\ \ \ \ \forall z\in [0,1]\ \ \mbox{ and }\ \ v_z(z) >0\ \ \ \forall z\in (0,1].\eqno(1.7) $$ These results are displayed in Figure 1 in a typical schematic contour plot of $(u,v)$ on $[0,1]\times [0,1]$. \begin{figure} \vspace{8cm} \hspace{2cm} \special{psfile=fig01.ps} \caption{Schematic contour plot of the the solution $(u,v)$. Note that $v$ (dashed lines) is a function only of $z$, while $u$ (solid lines) depends on both $x$ and $z$.} \end{figure} In Section 3 the solutions of Problem $(P_1)$ are described for all $p>0$. Because of (1.6), only the case $\lambda \geq 0$ will be considered. We show for $p\geq 1$ and $\lambda \geq 0$, or for $00,\\ (b) & \frac{d\eta}{dz}(0) =0 \end{array} \eqno(2.8) $$ where $\eta _H$ is the prescribed potential (or polarization). Next we scale the problem by defining dimensionless variables and parameters: Let $$ u \equiv\frac{C}{C_{0}}, \ \ x^* \equiv\frac{x}{L}, \ \ z^* \equiv\frac{z}{H} $$ and $$ v\equiv \frac{F\eta}{RT}, \ \ V\equiv \frac{F\eta_{H}}{RT}. $$ Also define the lumped parameters $$ \alpha \equiv \frac{L^{2}i_{0}s\tilde{A}}{DC_{0}nF}, \ \ \ \beta \equiv \frac{DnF^{2}C_{0}H^{2}}{RTsL^{2}\kappa}.\eqno(2.9) $$ Writing (2.1), (2.2), (2.6)-(2.8) in terms of these dimensionless variables and parameters and dropping the asterisks leads to the compact system of equations (1.1). Some typical values for the constants in (2.9) are given by Giner and Hunter. For $H=10^{-2}$ cm, $L=10^{-4}$ cm and $i_o = 10^{-8} A/$cm$^2$, those values imply that $\alpha \simeq 10^{-2}$ and $\beta \simeq 10^{-1}$. For the scaled potential, $V\simeq 10$ when $\eta _H = 300$ mV. \section{Preliminaries: the problem auxiliary $(P_1)$.} In this section we consider solutions of Problem $(P_1)$ for $p>0$ and $\lambda \geq 0$. The case $\lambda =0$ implies the trivial solution $w(x)\equiv 1$ for $0\leq x \leq 1$. We therefore concentrate on solutions for which $\lambda >0$. From the differential equation and the left boundary condition (1.3a,b), it follows that $w$ is smooth (at least $C^2$) and satisfies $$ w''>0 \mbox{ and } w'>0 \mbox{ on } \{ x\in (0,1):w(x) >0\}.\eqno(3.1) $$ There are two types of solutions of interest: positive solutions and deadcore solutions where $w=0$ in part of the domain [see for example Bandle, Sperb \& Stakgold (1984)]. In view of (3.1), the corresponding deadcore, i.e. the set where $w=0$, must be an interval of the form $[0,x_0]$ with $x_0\in [0,1)$. Assume now that $w$ is any solution. Multiplying (1.3a) by $w'$ and integrating yields $$ \frac{1}{2} (w')^2 = \frac{\lambda}{p+1} \left( w^{p+1} - w^{p+1}_0\right) \eqno(3.2) $$ with $w_0=w(0)>0$ for positive solutions and $w_0=0$ for deadcore solutions. Rearranging and integrating once more leads to the expression $$ \int^1_{w(x)} \frac{ds}{\{s^{p+1}-w^{p+1}_{0}\}^{1/2}} = \sqrt{\frac{2\lambda}{p+1}}(1-x)\ \ \ \mbox{ for } 0\leq x\leq 1.\eqno(3.3) $$ Explicitly evaluating this integral with $w_0=0$ yields the following form for the deadcore solutions provided that $01$ the integral converges but $w_0^{\frac{1-p}{2}} \rightarrow \infty$, and if $p=1$ the integral diverges. Hence $$ \lim\limits_{w_0\downarrow 0} F_p (w_0) = +\infty \ \ \ \forall p\geq 1.\eqno(3.7) $$ If $00\eqno(3.10) $$ in (3.9), one arrives at $$ \lim\limits_{w_{0}\uparrow 1} F'_p (w_0) = -\infty \ \ \ \forall p>0.\eqno(3.11) $$ Moreover for $p\ge 1$, (3.9) implies $$ F'_p(w_0) < -\frac{1}{w_{0}\{1-w^{p+1}_{0}\}^{1/2}}<0,\ \ \ 00$, equation (3.5) has a unique positive solution $w_0(\lambda ;p)$. Setting $w_0=w_0(\lambda ;p)$ in expression (3.3) implies that Problem $(P_1)$ has a unique positive solution for $p$ and $\lambda$ in these parameter ranges. Also the smoothness of $F_p$ and (3.12) imply that $w_0(\cdot ;p)\in C^\infty ((0,\infty))\cap C([0,\infty))$. Finally, we finish the case $0 (u-w_0)^{p+1}\ \ \ \mbox{ for }\ \ \ 00$ and $\lambda >0$, Problem $(P_1)$ has a unique solution $w(x;\lambda ,p)$ which is strictly increasing and convex at points where $w>0$. The solution is strictly positive $(w(0;\lambda,p)>0)$ if $p\geq 1$, or if $00$ the function $\Phi _p:[0,\infty)\rightarrow [0,\infty)$ defined through Problem $(P_1)$ by $$ \Phi _p(\lambda) := w'(1;\lambda ,p) ,\ \ \ \lambda \geq 0.\eqno(3.15) $$ \paragraph{Proposition 3.2} For every $p>0$, { \def\labelenumi{(\roman{enumi})} \def\theenumi{(\roman{enumi})} \begin{enumerate} \item $\Phi _p$ is strictly increasing on $[0,\infty)$; \item $\Phi _p(\lambda) \leq \sqrt{\frac{2\lambda}{p+1}}$ for all $\lambda \geq 0$ and $\lim\limits_{\lambda \rightarrow \infty} \frac{1}{\sqrt{\lambda}} \Phi _p(\lambda )=\sqrt{\frac{2}{p+1}}$. In particular $\Phi _p(\lambda)=\sqrt{\frac{2\lambda}{p+1}}$ for $00$ and $$ \parbox{4cm}{$w_0(\cdot ;p)$ is strictly decreasing on} \left\{ \begin{array}{lclcl} [0,\infty) & \mbox{with} & w_0(\infty ;p)=0 & \mbox{if} & p\geq 1.\\{} [0,\lambda (p)] & \mbox{with} & w_0(\lambda (p),p)=0 & \mbox{if} & 0\left( \frac{1+p}{2} \right) \left( \frac{1-p}{2} \right) - \frac{p+1}{2} w^p_0 \left\{ 1-w^{p+1}_0 \right\}^{-3/2} >0 $$ with $w_0\in (0,\delta)$ for some $\delta >0$. Thus $$ F'_p(w_0) \mbox{ decreases monotonically as } w_0\downarrow 0. $$ Then in view of (3.19), the only possibility is that $$ \lim\limits_{w_{0}\downarrow 0} F'_p(w_0) =-\infty \ \ \mbox{ for } 0w_2\}} \bigg[ \{(w_1-w_2)'\}^2 + \{g_1(w_1) - $$ $$ g_1(w_2)\} (w_1-w_2) + \{g_1(w_2) - g_2(w_2) \} (w_1-w_2)\bigg] dz=0. $$ Since all three terms are nonnegative on $\{w_1>w_2\}$, we must have $$ \{w_1>w_2\} = \emptyset\ \ \ \mbox{ or }\ \ \ w_1 \leq w_2\ \ \ \mbox{ on } [0,1]. $$ \hfill$\Box$ To use this lemma, we define (see also (3.15)) $$ \Psi (v) := \beta \Phi _p (\alpha f(v)) \ \ \ (v\geq 0)\eqno(4.1) $$ and write (1.1 $d-f$) as $$ (P_2)\left\{ \begin{array}{lcr} v'' = \Psi (v) & 0z_0\\ v(z_0)=a & , & v'(z_0) =b \end{array} \right. $$ has a unique solution. This contradicts $v_1(1)=V_1v_2$ on $[0,1)$ and $v'_1(1) < v'_2(1)$, \item $0<\beta _1<\beta _2<\infty$ implies $v_1>v_2$ on $[0,1)$ and $v'_1(1) v'_2(1)$. \end{enumerate} } Finally in the deadcore case, we derive an explicit set of bounds on the function $v(z)$. In principal, these bounds could be used to construct an existence proof for this case, but instead a different, more general approach will be used to prove existence in the next section. The bounds are interesting in their own right, however, because they give an explicit approximate solution which is accurate for a significant parameter range. Using the explicit deadcore solution for $u$ given for the auxiliary problem in (3.4), Eqn. (1.1d) becomes $$ v_{zz} = \beta\left(\frac{2\alpha f(v(z))}{p+1}\right)^{1/2} \quad 00$. From the results obtained there, it follows that the boundary value problem (1.1a-c) has a unique solution $u(\cdot ;v(z))$ for any $z\in[0,1]$ and any $v:[0,1]\rightarrow [0,\infty)$. Moreover the function $\Psi:[0,\infty )\rightarrow [0,\infty)$, defined by (4.1) and (3.15), i.e. $$ \Psi(v(z)) = \beta\Phi_p(\alpha f(v(z))) = \beta u_x(1;v(z))\ \mbox{ for } v\geq 0, $$ satisfies $$ \begin{array}{l} \Psi \in C^1([0,\infty)),\\ \Psi (0) =0,\\ \Psi '(v(z))>0 \mbox{ for all } v\geq 0. \end{array} $$ It remains to find a nonnegative potential $v$ which satisfies the boundary value problem (1.1d-f) for any $V>0$. For the deadcore case, the classical bounds given in Theorem 4.5 essentially prove the existence of such a potential. For the general problem, however, where no explicit formula for the concentration $u$ is available, such bounds are more difficult to arrive at. Therefore we turn to a functional-analytic approach using a Schauder fixed-point argument to prove a general existence result. For this purpose, we introduce the function $$ h(z) := V-v(z) \ \ \mbox{ for } 0\leq z\leq 1 \eqno(5.1) $$ which should satisfy $$ (\tilde{P}_2) \left\{ \begin{array}{lc} -h''=\Psi(V-h) \ \ \ 00$, then for $0\leq z\leq z_0$ by continuity $$ \begin{array}{rcl} T\hat{h}(z) & = & \int^1_{z_{0}} G(z;s) \Psi (V-\hat{h}(s))ds\\ & = & \int^1_{z_{0}} (1-s) \Psi (V-\hat{h}(s)) ds = \mbox{ constant } =V. \end{array} \eqno(5.6) $$ Hence $\hat{h}$ satisfies $$ \hat{h}(z) = T\hat{h}(z)\ \ \mbox{ for all }\ \ 0\leq z\leq 1. $$ This means that $\hat{h} \in C^2([0,1])$ also satisfies the differential equation $$ -\hat{h}'' = \Psi (V-\hat{h})\ \ \mbox{ on }\ \ (0,1) \eqno(5.7) $$ and the conditions $$ \hat{h}(z_0) = V\ \ \mbox{ and }\ \ \hat{h}'(z_0) =0 \ \ (z_0\geq 0).\eqno(5.8) $$ The smoothness of $\Psi$ implies that the initial value problem (5.7), (5.8) has $\hat{h}(z)\equiv V$, $0\leq z\leq 1$, as its unique solution. However, this contradicts the boundary condition $\hat{h}(1)=0$. Hence $$ 0\leq \hat{h}(z) < V\ \ \mbox{ for }\ \ 0\leq z\leq 1. $$ Introducing the potential $\bar{v} = V-\hat{h}$, we have shown \medskip \paragraph{Theorem 5.4} Given any $\alpha ,\beta ,p$ and $V>0$, there exist unique functions $\bar{v} \in C^2([0,1])$ and $\bar{u}(\cdot ;\bar{v}(z)) \in C^2([0,1])$ for each $0\leq z\leq 1$ which solve Problem $(P)$. The potential satisfies $$ 0<\bar{v}\leq V \mbox{ and } \bar{v}_{zz} >0 \mbox{ on } [0,1] $$ and consequently $$ \bar{v} _z >0 \mbox{ on } (0,1]. $$ \section{Iteration procedure.} Section 5 demonstrates the existence of solutions for Problem $(P)$ for any combination of the positive parameters $\alpha$, $\beta$, $p$ and $V$ using a Schauder argument. In this section, an alternative, more constructive existence proof is given in which the solution is obtained by successive iterations. This method, however, only converges when the parameters $\alpha$ and $\beta$ are sufficiently small. \medskip \paragraph{The Method.} Define sequences $\{v_n=v_n(z)\}^\infty_{n=0}$ and $\{u_n=u_n(x$,$z)\}^\infty_{n=1}$ with $x$,$z \in [0,1]$ in the following three-step iteration: \begin{enumerate} \item Let $v_0 := V$ on $[0,1]$. \item With $v_n$ given, let $u_n$ be the solution of $$ \left. \begin{array}{lr} u_{n_{xx}} = \alpha f(v_n(z)) u^p_n & 00\\ h_{1_{z}} (0) = 0,\ \ h_1(1) =V. \end{array} $$ Thus $v_1 = \max\{h_1,0\}\leq v_0$ on $[0,1]$. Consequently $f(v_1) \leq f(v_0)$, and as in Lemma 4.1, this implies $$ u_1 \geq u_0\ \ \mbox{ on }\ \ [0,1] \times [0,1]. $$ From\ the boundary condition at $x=1$, it follows that $$ 0\leq u_{1_{x}} (1,z) \leq u_{0_{x}} (1,z)\ \ \mbox{ for }\ \ 0\leq z\leq 1, $$ and thus $h_2 \geq h_1$ on $[0,1]$. Therefore $$ V=v_0 \geq v_2 \geq v_1 \geq 0\ \ \mbox{ on }\ \ [0,1].\eqno(6.1) $$ Again as in Lemma 4.1, this gives $$ u_0 \leq u_2 \leq u_1 \ \ \mbox{ on }\ \ [0,1] \times [0,1], $$ and thus $$ u_{0_{x}} (1,z) \geq u_{2_{x}} (1,z) \geq u_{1_{x}} (1,z) \geq 0\ \ \mbox{ for }\ \ 0\leq z\leq 1 $$ which means that $h_1\leq h_3\leq h_2$ on $[0,1]$. Together with (6.1), this implies the desired inequalities for the potentials. The corresponding inequalities for the concentrations follow after again applying Lemma 4.1. \item Suppose $U_n$ holds for some $n\in {\BbbM}$. Then $$ u_{n+2} \leq u_{n+3} \leq u_{n+1} \ \ \mbox{ on } [0,1]\ \ \times [0,1] $$ which gives $$ u_{{n+2}_{x}}(1,z) \geq u_{{n+3}_{x}} (1,z) \geq u_{{n+1}_{x}} (1,z) \mbox{ for } z\in [0,1]. $$ This means $$ h_{n+3} \leq h_{n+4} \leq h_{n+2} \ \ \mbox{ on }\ \ [0,1], $$ and thus $$ v_{n+3} \leq v_{n+4} \leq v_{n+2} \ \ \mbox{ on }\ \ [0,1].\eqno(6.2) $$ As above this implies $$ u_{n+3} \geq u_{n+4} \geq u_{n+2} \ \ \mbox{ on }\ \ [0,1] \times [0,1]. \eqno(6.3) $$ Now repeating the arguments gives $$ v_{n+4} \geq v_{n+5} \geq v_{n+3} \ \ \mbox{ on }\ \ [0,1] \eqno( 6.4) $$ and $$ u_{n+4} \leq u_{n+5} \leq u_{n+3} \ \ \mbox{ on }\ \ [0,1] \times [0,1]. \eqno(6.5) $$ The combination of (6.2)-(6.5) gives the statement $U_{n+2}$.\hfill$\Box$ \end{enumerate} } \bigskip The inequalities from Proposition 6.1 and its proof imply the existence of lower and upper potentials $\underline{v}$, $\bar{v}$ (or $\underline{h}$, $\bar{h}$) and concentrations $\underline{u}$, $\bar{u}$ such that $$ h_n \downarrow \bar{h} ,\ v_n \downarrow \bar{v} \mbox{ and } u_n\uparrow \underline{u} \mbox{ pointwise on } [0,1] \mbox{ as } n\rightarrow \infty \mbox{ through even values}, $$ and $$ h_n\uparrow \underline{h},\ v_n\uparrow \underline{v} \mbox{ and } u_n \downarrow \bar{u} \mbox{ pointwise on } [0,1] \mbox{ as } n\rightarrow \infty \mbox{ through odd values}. $$ Here $$ \bar{h} \geq \underline{h} ,\ \bar{v} =\max \{0,\bar{h}\},\ \underline{v} = \max\{0,\underline{h}\} \mbox{ and } \bar{u} \geq \underline{u}. \eqno(6.6) $$ Using the integral representation, as in (5.2), for the solutions $u_n$ and $h_{n+1}$, one finds immediately that the limit functions are classical solutions of the boundary value problems: { \def\labelenumi{(\roman{enumi})} \def\theenumi{(\roman{enumi})} \begin{enumerate} \item Letting $n$ (even) $\rightarrow \infty$ in step 2: $$ \left\{ \begin{array}{l} \underline{u}_{xx} =\alpha f(\bar{v}) \underline{u}^p\ \ \ 00$ (with $h(z)=v(z)$) on $(z_0$,$1]$. Equation (6.7) then implies $u(x,z)=1$ for $(x,z)\in[0,1]\times [0,z_0]$. But this means that $h_{zz} = h_z=0$ on $[0,z_0]$. Consequently $v_z(z_0)=0$. Thus the function $v$ satisfies $$ \begin{array}{l} v_{zz} = \Psi (v), \mbox{ for } z_00$ on $[0,1]$ and that $(u,v)$ solves Problem $(P)$.\hfill$\Box$ \begin{figure} \vspace{8cm} \hspace{0.5cm} \special{psfile=fig04.ps} \caption{Computational results in case of convergence.} \end{figure} To illustrate the iteration method, we present computations for which we owe thanks to Jacqueline Prins. In Figure 4 we have chosen $\alpha$,$\beta$ and $V$ so that numerically the method converges. Note that because the condition from Theorem 6.2 that $\alpha \beta\max f'(s) <2$ is not sharp, it is not strictly required. In fact, in Figure 4 we have $\alpha \beta f'(V) = 7.524$. (We use here $f'(V)=\max f'(s)$ if $\alpha _a= \alpha _c$.) \begin{figure} \vspace{8cm} \hspace{0.4cm} \special{psfile=fig05.ps} \caption{Computational results in case of non-convergence.} \end{figure} As a second illustration, in Figure 5 we have selected values of the parameters so that no convergence occurs. Hence $\bar{v} >\underline{v}$ on $[0,1)$. The actual solution $v$ (which exists by Theorem 5.3) is denoted by the middle dashed-curve. It was computed using a shooting procedure for Problem $(P_2)$. The details of this procedure will be given elsewhere. \begin{thebibliography}{120} \bibitem{1} Bandle C., R.P. Sperb \& I. Stakgold, Diffusion and reaction with monotone kinetics, Nonlinear Analysis TMA {\bf 8} (1984) 321-333. \bibitem{2} Gilbarg D. \& N. Trudinger, Elliptic Partial Differential Equations of Second Order, Springer-Verlag: Berlin (1977). \bibitem{3} Giner J. \& C. Hunter, The mechanism of operation of the Teflon -bounded gas diffusion electrode: a mathematical model, J. Electrochem. Soc. {\bf 116} (1969) 1124-1130. \bibitem{4} Levine, H.A., Quenching, nonquenching, and beyond quenching for solutions of some parabolic equations, Annali di Matematica pura ed applicata {\bf 155} (1989) 243-260. \bibitem{5} Yuh, C.Y. \& J.R. Selman, Polarization of the molten carbonate fuel cell anode and cathode, J. Electrochem. Soc. {\bf 131} (1984) 2062-2069. \end{thebibliography} \bigskip \begin{tabular}{ll} C.J. van Duijn & Joseph D. Fehribach\\ Faculty of Technical Mathematics& Department of Mathematical Sciences\\ Delft University of Technology& Worcester Polytechnic Institute\\ P.O. Box 5031& 100 Institute Rd.\\ 2600 GA DELFT& Worcester, MA 01609-2247\\ The Netherlands& E-mail bach@wpi.edu \end{tabular} \end{document}